Print & Go DIY Cable Installation Tool Checklist

Written by Dave Harris, trueCABLE Technical Specialist

LONG ZHUO Product Page

Getting your home or small business network in place is easier than you might think. The primary obstacle for many is identifying what tools you'll need to complete the task. Our Cable Academy has many resources on different aspects of choosing a cable and steps needed to complete your installation.

Preparations for your installation and where to source

These are the basic tools to get you started.  trueCABLE now offers many of the cabling tools. For the others, we recommend Amazon or your local hardware or home improvement store.  Because different termination options require their own specific tools, we have listed termination tools in their own section.  Other installation and construction tools are listed in the sections that follow. 

Basic Tools Needed For Ethernet Cable Termination

Punch Down Keystone Jacks

• Impact punch-down tool or Specialized keystone jack tool
• Ethernet cable jacket stripper
• Micro flush cutters

“Toolless” Keystone Jacks

• Parallel crimp pliers or Slip-joint pliers
• Ethernet cable jacket stripper
• Micro flush cutters

Field Term Plugs

• Parallel crimp pliers or Slip-joint pliers
• Ethernet cable jacket stripper
• Micro flush cutters

Modular 8P8C RJ45 Plugs

• RJ45 termination crimp tool
• Ethernet cable jacket stripper
• Micro flush cutters
• Small metal dowel rod (screwdriver shaft)
• Gloves
• Strain-Relief Boots

Basic Tools Needed For Running Ethernet Cable Through Conduit

• Large slip-joint pliers
• Multi screwdriver
• Pull string
• Fish tape
• Cable lubricant
• Swivels and Cable grips
• Electrical tape
• Tape measure
• Cable spool holder, aka reel caddy

Basic Tools Needed For Running Ethernet Cable Through Walls

• Stud finder
• Flexible glow rods
• Pull string
• Ship auger drill bit
• Long flexible drill bit
• Multi screwdriver
• Electric drill driver
• Electrical tape
• Tape measure
• Cable spool holder, aka reel caddy

Basic Tools Needed For Installation of Wall Mounted Receptacle

• Multi screwdriver
• Electric drill driver
• Drywall saw
• Stud finder
• Pencil
• Level
• Tape measure

Testing

• Cable tester [see Testing 10Gigabit Ethernet Over Copper on a Shoestring Budget]

Specialty Tools That May Be Needed

• Concrete drill bit
• Hammer drill
• Measuring wheel or laser range finder (used to avoid the 1" too short cable problem you don't want to have)

Download & Print this checklist here:

Going Through The Steps

Our “Cable Academy” offers a wide range of instructive and tutorial topics to help guide you through each phase: the planning, preparation, execution and troubleshooting of your Ethernet cable network, regardless of whether it’s outdoor or indoor.

Be sure to read this post on Top 5 Things to Consider When Running Ethernet Cable, before you begin the process. We can also help you determine the best cable type for your budget and long-range network goals. Reach out if you need help on which type of cable to go with.

We’d also love to hear from you on questions you might have or things that you’re doing to make the job easier. Please drop a comment in the section below to share your insights or challenges.

 trueCABLE presents the information on our website, including the “Cable Academy” blog and live chat support, as a service to our customers and other visitors to our website subject to our website terms and conditions. While the information on this website is about data networking and electrical issues, it is not professional advice and any reliance on such material is at your own risk.

Nature conservation, natural objects, aesthetics and space make laying cables underground unavoidable and necessary. Underground cable laying has added benefits in the form of reduced transmission loss and reduced risk of service supply loss in cases of extreme weather.

What is underground cable laying?

In areas where space for cables is limited and crunched, especially the urban regions, underground laying of cables is an efficient method. Telecommunications or electric power can be transmitted through underground cables. Data is transmitted from one point to another using cable laid on the ground instead of the ones hanging from poles and towers in an underground cable system.

For more Cable Laying Toolsinformation, please contact us. We will provide professional answers.

Explore more:
Smart Irrigation Technology: Controllers and Sensors
How to Save Money When Buying Prismatic Battery PACK Assembly Production Line
5 Things To Check When Choosing A GRP Water Tank

In comparison to overhead cables, underground cables are not visible to the naked eye and hence, retain the location’s aesthetic beauty. To ensure this, proper trenches need to be dug and the entire process needs to be carried out systematically to ensure success and minimum service requirements.

Benefits of underground cable laying

Climate change has made extreme weather conditions more common. In order to have an uninterrupted power supply and telecommunication in place, it is important that our infrastructure is planned and equipped to survive the harsh weather conditions. The following benefits make underground cable systems the preferred choice:

• Longer lifespan – Underground cables have a much greater life expectancy than aerial cables.
• Reduction in maintenance costs – Less exposure to nature’s fury like falling tree branches, strong winds and rain lead to fewer maintenance requirements.
• Accident prevention- Aerial cables can collapse on buildings and cars and put anyone near them at the risk of electric shocks. In this regard, underground cable laying is safer.
• Continuous service – Protected from external factors, underground cables provide uninterrupted power or service.
• Zero obstruction – Underground cable systems are completely out of sight and cause zero obstruction to properties.
• Minimum space requirement – Aerial cables require a lot of space for installing poles whereas underground cables require a much-limited band of land.

The Procedure & Installation of Underground Cable Laying

The effectiveness and efficiency of an underground cable system depend on proper cable laying, quality of cable joints and branch connections. There are three methods of underground cable laying. The procedure followed in each method is as follows:

Direct laying

This method requires digging a 1.5m deep and 0.45m wide trench which is then covered with a layer of sand. The cables are laid in the trench and covered with a 10 cm thick layer of sand. To protect against mechanical injury the trench is then covered with bricks and other materials.

If more than one cable is required to be laid in a trench then a horizontal or vertical inter-axial spacing of 30 cm is provided to prevent mutual heating.

Advantages:

• The simplest and cheapest method of underground cable laying
• The heat generated gets dispersed in the ground.

Disadvantages:

• High maintenance cost
• Pointing out accurate locations of faults is difficult
• Cable network alterations are difficult.

Draw in system

Ducts or conduits of cast iron or concrete or glazed stone with manholes are placed at suitable locations along the cable route. The manholes are used for pulling the cable in position.

Advantages:

• Manholes make additions, repairs and maintenance easy
• Low maintenance cost
• Mechanical protection lowers the occurrence of faults.

Disadvantages:

• Installation cost is high
• Low heat dispersion due to grouped cables.

Solid system

Underground cables are laid in open pipes or troughs along the cable route. The troughs are usually made of asphalt, stoneware or cast iron. Asphaltic compound is used for filling the troughs once the cable is laid in position.

Advantages:

• Strong mechanical protection

Disadvantages

• Skill and labour requirements result in high costs

Challenges of underground cable laying

The various challenges in the process of laying underground cables are as follows:

1. High installation cost: The initial installation cost for an underground cable system is high as costs for restoration of roads and surrounding infrastructure add to the total cost.
2. Permissions and approvals: Before starting with the digging process, a range of approvals need to be obtained from relevant authorities.
3. Cumbersome modifications: Inability to locate lines and particular sections makes making additions or modifications to the line tedious.
4. Obstacles in cable route: The cable route needs to be designed keeping in mind any obstacles that may be there in the route.
5. Insulation requirements: Layers of insulation are needed for underground cables to withstand the high voltage flows.

FAQs

What is the minimum depth for cable laying below the ground?

The minimum depth for cable laying below the ground varies according to the voltage capacity of the cable. The depth should be atleast 0.9m for 3.3kV to 11kV cables, 1.05m for 22kV to 33kV cables. The minimum depth of a low voltage cable should be 0.75m.

What is the cable laying method?

The dependability of a cable network depends on the laying method and attachment of fittings like cable end boxes, joint, branch connectors, etc. Laying method defines the approach that will be followed in terms of digging of trenches, fitting of ducts and positioning of cables. There are basically three methods of laying cables underground which are direct laying, draw-in and solid system.

How deep should the cable be buried underground?

The depth requirements vary according to the topography of the terrain. For road crossings and drainage ditches that are yet to be finished, the standard depth varies from 30 to 42 inches. If the ground remains frozen for extended periods of time, then the depth should be at least 30 inches. Roadway crossings require deeper digging with a standard depth of 42 inches.

What should be the normal depth of laying cables?

The normal depth of laying cables is influenced by climate conditions and terrain. It ranges from 30 inches to 42 inches depending on the conditions.

What is the advantage of direct laying of underground cables?

Direct laying of underground cable systems has the following benefits:

Contact us to discuss your requirements of Wire Pulling Tools. Our experienced sales team can help you identify the options that best suit your needs.