'Cleaner,' More Efficient Additives for Flexible and Rigid PVC

New vinyl additives designed to be more environmentally friendly while offering improved performance are available from Crompton Corp., Middlebury, Conn. Among the firm’s latest developments are low-VOC heat stabilizers for flexible and rigid PVC and impact modifiers for rigid PVC.

For more information, please visit our website.

Stabilizers for flexibles

The Mark Series of CaZn and BaZn liquid heat stabilizers were originally developed for low VOC emissions in general-purpose flexible PVC. They have less than 10 ppm phenol content, and they resist hydrolysis and free-phenol formation, suiting them for low-emission indoor flooring and auto interior uses. More recently, another advantage of these products has become apparent. They also have very low phosphorus content—under 2.5%—compared with 3% to 5% for conventional mixed-metal liquid stabilizers. Higher phosphorus content has been found to be related to problems of exudation and poor printability.

Included in this series are Mark , a low-phosphite CaZn, and Mark , a high-efficiency BaZn. These stabilizers reportedly confer low plate-out, higher resistance to oxidation, good clarity, and better heat stability than conventional mixed-metal liquids. They are also said to provide good printability due to the low plate-out, and finished products survive very well in hot, humid climates and during warehouse storage. These stabilizers are premium priced but they can be used at 20% to 25% lower levels (2 to 3 phr) than conventional stabilizers in many applications. 

Crompton is also developing a new tri-metal (CaKZn) liquid. Recommended at 2 to 3 phr use levels, this heat stabilizer has been shown to outperform conventional BaZn stabilizers in clear and filled flexible compounds for uses other than wire and cable. FDA approval for food contact is expected.

Also new is a solid CaZn heat stabilizer, Mark , recommended for wire and cable jacketing, light-duty primary insulation, and general-purpose flexible PVC extrusion. The product is said to halt die-lip drool and is used at 3 to 4 phr as an alternative to lead or Ba/Zn stabilizers.

Another new solid CaZn is Mark for heavily filled, flame-retardant compounds used in plenum jacketing. The stabilizer reportedly will not add to flammability or smoke generation, unlike many other stabilizers. Typical use levels are 2.5 to 8.0 phr.

Mark ACM is a new solid CaZn for primary building-wire insulation. It’s reportedly the first alternative that meets UL83 standards, both wet and dry. Typical use level is approximately 4 to 6 phr.

Mark is a solid CaZn stabilizer for automotive interiors, where there is a trend to replace BaZn heat stabilizers in flexible applications such as door and instrument panels. Used at 2 to 3 phr, the product boasts very low fogging.

Stabilizers for rigids

Low-volatility heat stabilizers for rigid PVC also number among Crompton’s new offerings. One example is Mark , a liquid methyltin for rigid calendering and profile extrusion. It boasts very low odor and is recommended at 1.20 to 1.50 phr.

Mark is a new liquid butyltin stabilizer for rigid foam profiles and sheet. It is said to act both as a stabilizer and an activator for azodicarbonamide foaming agents. It reportedly provides 10% lower foam density than standard tin mercaptides and is self-lubricating, which is said to produce surface smoothness and less pinking. Use level is typically 2.5 phr.

Also new is Mark butyl-based tin stabilizer for fencing and window profiles. It offers improved flow, allowing for higher output rates. This product was developed to minimize plate-out and chatter in the calibrator at high line speeds. It is said to provide excellent long-term heat stability. Use levels are 1 to 1.5 phr.

Crompton has a new liquid methyltin one-pack stabilizer/lubricant package for NSF- and PPI-approved PVC pipe. Mark is said to be the first self-lubricating (paraffinic) methyltin on the market. It eliminates the need for paraffin wax and provides the heat stability required for pipe extrusion. At use levels of 2.0 to 2.3 phr, this additive has been shown to greatly reduce plate-out and to allow for a higher flow rate from the die.

Crompton is also developing CaZn stabilizers that can offer improved weatherability of white window and fencing profiles in hot, arid climates. One example is TS , a solid CaZn one-pack with internal and external lubricants, recommended for use at 4 phr. It is said to help prevent surface degradation and yellowing due to uv, heat, and dryness. Crompton will develop a series of these products to match user needs in terms of color development and long-term heat stability.

Modifiers for rigids

Since its acquisition of GE Specialty Chemicals, Crompton has further expanded the Blendex line of impact modifiers for PVC. New for rigids is Blendex 338, an ABS impact modifier designed for the non-weatherable substrate layer of siding and fencing. According to Crompton, it acts as a fusion promoter, so that it can be used at lower levels than acrylic impact modifiers—2 to 3 phr vs. 4 phr, with no processing aid added. In addition to lower concentrations, this modifier allows for higher filler levels, which permit further cost savings.

Technical parameter

Model  No.

Appearance

Explore more:
10 Questions You Should to Know about how to make HPMC solution

Lianfu Product Page

Heating Loss (90±2℃)

Initial Melting Point

Thermo Gravimetric (200±5℃)

Dosage

CZ-201A

White Powder

﹤2.0%

﹥53℃

﹤8.0%

1.2-1.5PHR

Package & Storage

It must be stored in a cool, dry place, and kept away from hot steam pipes and fire sources to avoid direct sunlight. This auxiliary is packed by 25kg per bag .

Product Introduction

PVC Air Blowing Sole & Slipper Ca-Zn Stabilizer is a new type of stabilizer for PVC products which has been jointly developed by our company and university. It is mainly used in the production of air blowing sole and slipper. The product has the following advantages:

1. Good color stability: The product can keep the original color of PVC products for a long time.

2. Good heat resistance: The product has good heat resistance and can be used in high temperature environment.

3. Good weather resistance: The product has good weather resistance and can be used in outdoor environment.

4. Non-toxic: The product is non-toxic and safe to use.

Product Advantage

There are many stabilizers on the market for PVC air blowing sole and slipper production, but Ca-Zn is superior for several reasons. First, it provides excellent color stability for the finished product. Second, it ensures that the PVC remains flexible, even in extreme temperatures. Third, Ca-Zn stabilizer is more resistant to degradation than other stabilizers, meaning that it will keep your product looking new for longer. Finally, Ca-Zn is less expensive than other stabilizers, so you can save money while still getting a high-quality product.

Technical Parameters

There are many factors to consider when selecting a Ca-Zn stabilizer for PVC Air Blowing Sole & Slipper. The most important factor is the intended use of the product. Other important factors include compatibility with other ingredients, processing conditions, and cost.

The type of Ca-Zn stabilizer you select will have a direct impact on the performance of your product. For example, if you need a high degree of heat stability, you will need to select a different stabilizer than if you only need moderate heat stability. Other properties that can be affected by your choice of Ca-Zn stabilizer include toughness, clarity, colorfastness, and more.

It is important to consult with an expert when selecting a Ca-Zn stabilizer for your specific needs. They will be able to guide you to the best product for your application and help ensure that you get the results you need.

Product Uses

PVC air blowing sole and slipper is a kind of shoe which is made of PVC. It is comfortable, breathable and has good flexibility. The Ca-Zn stabilizer can make the PVC more stable and have better physical properties, so that the shoe will be more durable.

Contact us to discuss your requirements of PVC Cazn Stabiliizer for Rigid Foaming Product. Our experienced sales team can help you identify the options that best suit your needs.