Single Padel Court: Sizes, Costs, and Installation Guide

A single padel court normally uses a playing area of 6 m × 20 m, while a standard doubles padel court uses 10 m × 20 m. The single format keeps the full 20 m court length but reduces the width for one-versus-one play. For a B2B project, the final budget depends on the enclosure system, glass or mesh specification, foundation, drainage, lighting, freight, installation, and local building requirements. I recommend confirming the court dimensions, site conditions, and technical scope before requesting comparable quotations.

Click here to get more.

In this guide, I explain how to evaluate a single padel court for sale, including dimensions, material options, cost structure, installation stages, buyer selection criteria, and supplier due diligence. The dimensions and playing requirements should be checked against the latest rules published by the International Padel Federation (FIP), while structural and electrical requirements must also comply with local regulations.

Key Takeaways for Single Padel Court Buyers

• A single padel court commonly measures 6 m × 20 m internally, based on the individual-court format described in the FIP rules.
• The court enclosure typically combines steel or aluminum framing, safety glass, welded mesh, access doors, and a central net.
• The total project cost includes more than the court kit: foundations, ground preparation, drainage, lighting, freight, installation, and taxes may be separate.
• A level, adequately drained surface is essential because settlement or water accumulation can affect alignment, safety, and playing quality.
• Before ordering, I advise buyers to request drawings, material specifications, wind-load assumptions, packing details, warranty terms, and a complete bill of quantities.

Who This Single Padel Court Guide Is For

This guide is intended for sports facility developers, hotels, resorts, schools, clubs, commercial landlords, municipal buyers, and distributors planning a compact padel installation. It is particularly useful when the available site is too narrow for a conventional doubles court or when the operator wants a one-player training and recreation format. A single padel court may also be considered for private developments, although local planning and safety approval still need to be reviewed.

I focus here on procurement and project planning rather than on a specific brand model. A supplier quotation should be treated as a technical proposal that requires comparison against the same dimensions, materials, accessories, installation scope, and site assumptions. This approach helps prevent a low initial price from becoming a higher installed cost later.

What Is a Single Padel Court?

A single padel court is an enclosed court designed for individual play rather than the usual four-player doubles format. The commonly specified internal playing area is 6 m wide × 20 m long, with the court divided by a net along the center. The enclosure uses transparent and opaque or mesh sections to define the playing boundaries and contain the ball.

The FIP Rules of Padel identify a standard court as 10 m wide and 20 m long and also describe an individual-court option with a 6 m width and 20 m length. The same rules specify a net height of approximately 0.88 m at the center and 0.92 m at the ends. I recommend treating the latest official FIP document as the primary reference for sporting dimensions and checking whether your intended competition or operating format permits the single-court layout.

Unlike an open tennis court, a padel court is a structural enclosure. Its performance depends on frame rigidity, glass or panel quality, mesh spacing, connection design, anchoring, corrosion protection, and the condition of the supporting slab. The court therefore needs to be evaluated as a coordinated metal building materials and sports-infrastructure package.

Single Padel Court Dimensions and Technical Specifications

Playing Area and Clearances

The principal internal dimension is 6 m × 20 m, giving a nominal playing area of 120 m². The external footprint will be larger because the frame, glass, mesh, doors, service access, and maintenance clearances extend beyond the playing lines. I advise reserving additional space around the structure for construction access, inspection, drainage, lighting equipment, and safe movement.

The FIP rules describe enclosure heights that commonly include approximately 3 m walls in relevant sections, with higher mesh or enclosure arrangements in some areas. Exact wall, mesh, and overhead dimensions should be confirmed from the current rules and the selected court design. A supplier should provide a dimensioned general arrangement drawing rather than relying only on a product photograph.

Main Material Options

The glass thickness shown above is an industry planning range, not a universal rule for every court. A project engineer should confirm the suitable specification based on panel size, support spacing, wind exposure, impact risk, and local standards. For lighting, I do not recommend selecting fixtures by wattage alone; a lighting designer should verify the required lux level, uniformity, glare, and light spill for the actual site.

Cost Structure of a Single Padel Court

The price of a single padel court for sale is best understood as a package of cost categories rather than one fixed number. A basic quotation may cover the court frame, glass, mesh, doors, net, turf, and standard hardware, but exclude civil works and installation. A complete project budget should separate product cost, site cost, logistics, labor, electrical work, and contingency.

Because these variables differ considerably between countries and sites, I avoid presenting an unsupported universal price. For budgeting, I suggest obtaining at least three quotations based on the same 6 m × 20 m court specification and asking each supplier to identify optional items separately. A realistic project allowance should also consider site preparation, tax, exchange-rate movement, replacement parts, and a contingency for unforeseen ground conditions.

For a more reliable comparison, ask suppliers to quote the same delivery term and currency, state the number of packages, provide gross shipping weight in kg, and confirm the estimated production period in days. These data points make freight and lead-time comparisons more meaningful than comparing product prices alone.

Rayjun are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.

Site Requirements Before Installation

Foundation, Level, and Drainage

A single padel court requires a stable and sufficiently level base capable of receiving anchors and distributing structural loads. The preferred foundation design depends on soil conditions, frost risk, drainage, wind exposure, and local engineering requirements. I recommend a site survey before fabrication because repairing an unsuitable slab after delivery can be more expensive than preparing it correctly at the start.

Water management is equally important. The slab and surrounding area should be designed so that rainwater does not remain beneath the turf or around the anchor points. The exact slope, drainage layer, reinforcement, concrete strength, and curing period should be specified by the local civil engineer rather than copied from a generic supplier brochure.

Access, Lighting, and Safety

The delivery route must accommodate long frame members, glass crates, lifting equipment, and installation tools. Buyers should verify gate widths, turning areas, unloading positions, storage protection, and the distance from the delivery point to the court foundation. Glass should remain properly packaged and protected from impact until installation.

Lighting design should address play visibility, glare, neighboring properties, and maintenance access. Electrical work may require local permits, residual-current protection, grounding, and inspection by a qualified electrician. The International Electrotechnical Commission provides general standards for electrical installations and equipment, but the applicable national code remains the controlling requirement for the project.

Single Padel Court Installation Process

1. Confirm the layout: Approve the 6 m × 20 m internal court drawing, door positions, glass arrangement, mesh layout, lighting locations, and maintenance clearances.
2. Inspect the site: Verify dimensions, ground bearing conditions, drainage, access, utilities, and local planning requirements.
3. Construct the base: Complete the engineered slab, drainage provisions, embedded services, and curing process before court assembly.
4. Receive and inspect materials: Check crates, glass, steel members, hardware, labels, damage, and packing lists immediately after delivery.
5. Install the frame: Position base plates and anchors, assemble the structural members, and verify line, level, and diagonals.
6. Fit enclosure components: Install mesh, doors, glass panels, protection components, net posts, and the net system according to the approved drawings.
7. Install the surface and lighting: Prepare the turf, complete seams and infill as specified, then install and test the lighting and electrical system.
8. Complete handover: Record torque checks where applicable, inspect sharp edges and gaps, collect maintenance documents, and obtain final approval.

The installation duration cannot be stated accurately without knowing the foundation condition, crew size, weather, equipment, and shipping status. As a planning reference, suppliers may describe assembly separately from civil works, but buyers should request a written schedule with milestones in calendar days. FIP rules, local building codes, and the supplier’s installation manual should be reconciled before final acceptance.

How to Select a Single Padel Court Supplier

Technical Evaluation Checklist

• Does the supplier provide a dimensioned drawing for a 6 m × 20 m single-court layout?
• Are glass type, thickness, edge treatment, and fixing details clearly stated?
• Is the steel frame corrosion protection defined by process and coating specification?
• Are design assumptions for wind, anchoring, and local exposure documented?
• Does the quote include doors, net, turf, fixings, lighting, spare parts, and tools?
• Are packaging dimensions, gross weight, shipment terms, and production lead time provided?
• Are installation drawings, maintenance instructions, replacement parts, and warranty conditions included?

I also recommend asking whether the supplier can adapt door positions, colors, branding panels, lighting supports, and foundation interfaces without compromising the structural design. Customization should be confirmed in the contract because an illustration or sales discussion is not a substitute for an approved technical drawing. The buyer should retain the final bill of materials, revision number, and inspection criteria.

Rayjun Supplier Support

At Rayjun, I approach a single padel court project from a metal building materials perspective. We can support the quotation process by organizing the required steel or metal enclosure scope, reviewing drawings, clarifying material options, coordinating packaging information, and helping buyers compare product specifications with installation requirements. The exact supply scope depends on the project drawings, destination, quantity, and whether the buyer needs materials only or broader project coordination.

For an accurate proposal, I would request the target country, quantity, site dimensions, foundation status, preferred enclosure materials, lighting requirement, delivery term, and installation expectation. This information allows us to separate the court package from civil, electrical, freight, and labor costs. It also reduces the risk of receiving quotations that appear comparable but contain different inclusions.

Common Procurement Mistakes

One frequent mistake is ordering a court kit before confirming the foundation and external footprint. The internal playing dimension may be 6 m × 20 m, but the required construction area is larger and varies by frame design. Another mistake is selecting the lowest equipment price without checking glass protection, corrosion treatment, spare parts, installation documentation, and freight assumptions.

Buyers should also avoid treating “single padel court” as a universally identical product. Some suppliers may use the term for a training court, a reduced enclosure, or a customized recreational format that does not correspond to the current FIP individual-court dimensions. I advise specifying the exact internal dimensions, enclosure height, materials, safety requirements, and intended use in every request for quotation.

Conclusion: Is a Single Padel Court Right for Your Project?

A single padel court can be a practical solution when a project needs a 6 m × 20 m individual format, compact footprint, or dedicated training facility. Its success depends less on the court name than on correct dimensional planning, a stable and drained foundation, suitable enclosure materials, safe glass installation, compliant lighting, and complete supplier documentation. The FIP rules should guide the sporting layout, while local engineers and authorities should control structural, electrical, and planning decisions.

My recommended next step is to prepare a one-page technical brief listing the internal size, site conditions, materials, accessories, delivery term, installation scope, and required documents. Send that same brief to qualified suppliers and compare the total installed scope rather than the equipment price alone. Rayjun can review the metal building materials requirements and help prepare a structured quotation for your single padel court project.

Sources and Reference Framework

• International Padel Federation (FIP), Rules of Padel — reference for court dimensions, net height, and playing-area requirements.
• International Electrotechnical Commission (IEC) — reference framework for electrical safety standards; the applicable national electrical code governs the installation.
• Local building, structural, fire, accessibility, and planning authorities — required references for site-specific approval and construction compliance.

Want more information on single padel court? Feel free to contact us.